Supervisor:
Southwest Ordnance Industry Bureau
Organizer:
Chongqing Ordnance Industry Society
Chongqing University of Technology
Chongqing University of Technology
Vol. 44 No. 6 (2023) Published: 2023-06-28
- Study on impact resistance of pre stressed confined concrete with a wedge tightened truncated cone
- Influence of charge speed on the height of three wave points
- Prediction of peak overpressure of underwater shaped charge based on DACO BP neural network
- Research on the bunching performance of an improved plasma torch of strong current arc explosion shock waves
- Lightweight research based on YOLOv5 grenade detection algorithm
- Design and realization of the speed control system for rail remote target carriers
- Prediction of the influence of parameters of JWL equation of state on EFP velocity based on BP neural network
- Study on performance improvement of HoloLens2 tracking registration in night combat support operations
- Study on dynamic characteristics of aluminum foam filled hemisphere shell
- Numerical simulation of the influence of a liner gap on three layer tandem EFP forming
- Ballistic design and simulation of cruise ramjet guided projectiles with an extended range
- Study on interfering tactical GPS guided weapons during terminal protection of caverns
- Dynamic modeling and exterior trajectory characteristics analysis of transverse sensitive submunition
- Experimental study on the thermal action law of TNT explosion temperature field
- Study on rapid speculation of high altitude wind parameters of artillery firing based on WOA Elman
- Numerical study on dynamic aerodynamic characteristics of rockets with different tail structures
- Evaluation and optimization of air defense combat effectiveness based on ABMS and orthogonal tests
- Optimization design of loitering munition airfoils based on the CST parameterization method
- Simulation of the dynamic process of underwater wall attached launch muzzles
- Analysis on static strength of turbine blades based on multi field coupling
- Drop tests of lightning protection seats in simulation of explosion impact load
- Research on the launching environment of gun grenades based on ADAMS
- The multi object detection method of fused images based on improved YOLOv7
- Study on ultrasonic temperature sensing technology of alumina single crystal
- Anchor free image target detection based on scale independent loss optimization
- Logic design of the standby defusing module of the electronic safety system
- An adversarial sample generation model for the intrusion detection system based on Generative Adversarial Networks
- Weakly supervised object detection algorithm based on feature enhancement and loss optimization
- Digital twin modeling method for on wing aero engine performance
- Multi UAV cooperative mission planning under faults based on IDPSO
- Formation tracking control of the multi UAV system with time varying communication delay
- Application and analysis of the fuzzy variable structure control strategy in UUV heading motions
- Research on robot path planning based on reinforced ant colony optimization
- UAV individual recognition method based on Scale Down ResNet
- Research on the multi axis coordinated speed control method of heavy special equipment vehicles
- Contact failure analysis of preloaded eccentric structures
- Performance test method of hemispherical resonators based on interdigital electrode excitation and attenuation signal fitting
- Reverse design and construction of the working profile surface of a globoidal indexing cam
- Study on mixing devices of salt spray aerosol in a high humidity environment
- On flexural properties of carbon fiber/epoxy laminates of interlaminar toughened stainless steel particles
- Research on the properties of carbon/carbon silicon carbide (C/C SiC) composites in hypersonic jets
- Overall uncertainty assessment of near infrared spectrum analysis of jet fuel
- Design of marine hoist booms based on abaqus carbon fiber composites