Supervisor:
Southwest Ordnance Industry Bureau
Organizer:
Chongqing Ordnance Industry Society
Chongqing University of Technology
Chongqing University of Technology
Vol. 44 No. 4 (2023) Published: 2023-04-28
- Experimental research on bore damage of large caliber machine gun barrels
- Requirement analysis of the tracking capability of observation equipment for high speed aerial targets
- Velocity threshold of shock initiation of shielded composition B impacted by typical fragments
- Effect mechanism of tungsten alloy fragments on penetration depth of shaped charge
- Numerical simulation and experimental research of shaped energy cutting and separating aluminum plates
- Research on the influence of a curved tail on aerodynamic characteristics of a projectile
- Research on the simulation of large airbag gunpowder inflation tests
- Mixed reality based self propelled artillery repair guidance system
- Overview of intelligent collision avoidance system technology for unmanned underwater vehicles
- Review on quadrotor vision guided autonomous landing on a moving platform
- Research on pseudo arc length algorithm for strong discontinuity based on coordinate transformation
- Formulation design of main charge of combustion tear gas bomb based on the uniform design method
- Research on the cross monitoring vidicon trajectory prediction method based on track identifiers
- Research on application of machine learning to reverse identification of aerospace structure loads
- UAV task allocation based on firework algorithm under uncertain conditions
- Performance analysis of quadrupole electromagnetic railgun launchers based on muti field coupling simulation
- Application of 3D variational numerical weather forecast to ballistic solutions
- Control strategy of parallel operation of an inverter and a diesel generator set controlled by a VSG
- Numerical simulation and experimental research on pressure cycling life of hydraulic mechanical units
- Research on the mechanical fault diagnosis method based on adaptive Fourier decomposition and synchronous extraction transform
- Tolerance analysis of the gun shell throwing mechanism based on SDT model and Monte Carlo method
- Vibration reduction optimization of electromagnetic rail launchers based on stiffness matching
- Fault diagnosis of industrial robot gearboxes based on a deep Boltzmann machine
- The model for fault diagnosis of hydraulic systems based on the PSO SES BPNN algorithm
- Effect of defocus amount on properties of GNPs/AlSi10Mg composites formed by SLM
- 〖STHZ〗Numerical simulation of critical initiation characteristics of the explosive PBX 9404
- Research on oblique penetration resistance of Ti/Al3Ti laminate composites based on the material point method
- Effect of Y(NO3)3 doping on the microstructure and wear resistance of AZ91D micro arc oxidation coating
- Effect of heat treatment on copper/steel explosive composites
- Sliding mode control of electromechanical actuators based on an improved RBF network
- Motion control of robotic fish based on RBF neural network adaptive sliding mode
- Estimation methods of frequency hopping parameters of small scale UAV remote controllers
- Automatic marking of semi supervised landing gears based on CenterNet
- Frequency domain response identification method for small unmanned helicopters based on ACO LEVY
- A salient object detection algorithm based on convex hull calculation and wavelet transform
- Pre processing algorithm of multispectral image strips of an aerial filter array
- Research on target detection based on an improved YOLOv3 SPP algorithm
- UAV system design based on an improved visual inertial odometry
- Risk assessment of UAV collision considering multiple factors
- Individual identification for a radar emitter combined with attention mechanism and CNN