Supervisor:
Southwest Ordnance Industry Bureau
Organizer:
Chongqing Ordnance Industry Society
Chongqing University of Technology
Chongqing University of Technology
Vol. 45 No. 11 (2024) Published: 2024-11-30
- Complex sea surface ship target recognition based on lightweight YOLOv4 and KCF
- YOLOv7 F: A lightweight real time ship detection algorithm
- An information filter based on modified unbiased converted measurement for maneuvering target tracking
- Adaptive artificial potential track planning method based on reinforcement learning
- Research on control of ship dynamic positioning system based on novel TSM
- The stability research of numerical solution for rigid body exterior ballistics and fuze mechanical environment in exterior ballistics
- Research on magnetic anomaly response characteristics of penetration fuze based on active magnetic detection
- Security system safety research for fully electronic initiators
- Research on laser fuze based on time domain variable responsiveness
- Research on the multi attitude inertial ignition performance of aerial bomb fuze
- Optimization method of the receiving frame of the hat shaped induction set fuzebased on finite element
- Estimation of high altitude wind parameters of guided projectile based on NGO BP
- Simulation analysis of the aerodynamic characteristics of airborne submunitions
- Numerical simulation of reactive armor interfering kinetic energy projectile in complex natural environment
- Aerial situation threat mining based on deep clustering algorithm
- Experimental study and numerical analysis on energyrelease characteristics of bullet primer
- Effect of shaped charge structure parameters of combined liner on penetration performance
- Detonation mechanism and judgment of a linear concentrated charge metal jet on a steel plate rear charge
- PMSLM cogging force suppression based on unequal width combinations of tooth boot shaped slot wedge
- Aerodynamic analysis and optimization of trailing edge variable camber airfoil under large deflection angle
- Study on deformation deflection law of metal sheet under secondary impact loading
- Study on the influence of release conditions on the ascending process of high altitude balloons
- Research on aerodynamic characteristics and efficiency of flapping wing aircraft
- Research on guided wave high temperature structural damage diagnosis technique based on thermal buffer probe
- Research on firing accuracy test method of anti aircraft gun based on target drone with multi target radar
- Lightweight design of flywheel hub structure for aviation heavy fuel piston engine based on multi objective optimization
- Mach number distribution controllable axisymmetric inlet multi objective optimization design
- Lightweight design of tail fin based on co simulation of genetic algorithm and finite element calculation
- Fatigue life analysis of firing pin based on finite element method and test date
- Mobile robot control using self triggered model predictive control and PID theory
- Coordinated control of robotic arm and digital twin based on the combination of physical and virtual entities
- A carrier allocation method based on clustering algorithm
- Research on attitude control method of statically unstable aerial bomb in initial trajectory section
- Application and simulation research of error based LADRC in UAV flight height control
- Data driven model predictive control based method for unmanned aerial vehicle trajectory tracking
- A predictive maintenance decision algorithm for UAV swarms based on deep reinforcement learning
- Research on infrared ship target detection and tracking method based on improved PP YOLOE and ByteTrack algorithms
- Optical design for measuring underwater irradiance in seawater environment light field
- Research on optoelectronic measurement technology of muzzle offset state during marching
- Active stereo vision matching algorithm based on four color structured light line pattern