Supervisor:
Southwest Ordnance Industry Bureau
Organizer:
Chongqing Ordnance Industry Society
Chongqing University of Technology
Chongqing University of Technology
Vol. 45 No. 3 (2024) Published: 2024-03-28
- Study on the mechanical properties of RDX based melt cast explosives at different temperatures
- Research on temperature control of micro grating accelerometer
- Research on the influence of plateau environment on the temperature field and infrared characteristics of vehicle power cabin
- Analysis of cavitation characteristics of swash plate axial piston pump
- Study on the protective effects of laminated buffering target plate on bomb borne testers
- Design of fastest descent system for circular parachute
- The moving mesh method for the dynamics of an axially moving beam subject to inner pressure
- Study on the propagation path and numerical simulation of surface cracks in three dimensional structures
- Impact detonation threshold study of kinetic energy blocks with angle of attack impacting cased B explosives
- Study on the law of charge density and constraint effect on impact initiation characteristics
- Fault state evaluation of armored vehicle power system based on BN AHP
- Analysis on the influence of center of gravity layout and drift angle on the longitudinal stability of airdrop hovercraft
- Topology optimization design of aircraft flap based on variable density method
- Numerical study on aerodynamic characteristics of a new type of compound wing with ground effect
- Research on evaluation method of static blast shock wave data processing
- Research on ammunition ramming motion for inertial loading
- Simulation research on the effect of the liner structure onpenetration capability of linear shaped charge
- Rigid flexible coupling modeling and simulation of height adjustment process of adjustable launch base under ship sway
- The influence of structural parameters on penetration performance of cylindrical biconical combined
- A review of structural response of plate frame under explosive shock wave
- Advances in autonomous navigation and positioning technologies for underwater vehicles
- Review of research on non pneumatic tyres for special vehicles
- Study on properties of microencapsulated self healing carbon fiber reinforced composites
- Research on dynamic mechanical properties of CFRP materials based on rate dependent improved bridging model
- A study on the effect of sequential solidification process on microporosity in large aspect ratio charge
- Research on electromagnetic wave absorbing performance of cobalt sulfide materials with different morphologies
- Numerical simulation of 316L stainless steel/CK22 carbon steel explosive welding pipe
- Screw surface defect detection based on neural network
- Research on 3D imaging and sub pixel quantitative method of weld defects
- New hydraulic tank design based on phase change composites
- Layered imaging detection algorithm for fuze steel balls based on linear scanning
- Eddy current detection system with modular array
- Active constraint technology on aircraft load calibration test
- Research on dynamic mechanical properties of metal rubber under high speed impact
- Shape estimation for elliptic extended target based on neural network
- Research on target following of spherical robot based on PPO
- Trajectory tracking control of quadrotor based on fractional order S plane model
- Pedestrian and vehicle identification from the perspective of unmanned aerial vehicles based on ST YOLOv7
- Three phase series arc fault detection based on improved EfficientNetV2 algorithm
- Detection algorithm of ground target based on attention and channel rearrangement for UAV
- Application of target recognition technology based on visual image processing in mobile robot
- Research on infrared scene target detection method based on improved YOLOv5s lightweight model