Supervisor:
Southwest Ordnance Industry Bureau
Organizer:
Chongqing Ordnance Industry Society
Chongqing University of Technology
Chongqing University of Technology
Vol. 44 No. 8 (2023) Published: 2023-08-28
- Risk assessment of TATB automatic pressing molding based on HAZOP deviation degree
- Study on damage law of pressed explosives under different impact velocities
- Analysis of thermal response characteristics of 2,4 dinitroanisole melt cast explosive
- Experiment and numerical simulation of ceramic fragment penetrating titanium alloy thin targets
- Design and verification of heat insulation and slow heat release of a fuze
- Loading planning optimization methods of large equipment air transport
- Structural design of the high mobility heavy duty truck frame system
- Driving stability analysis of the carrier based aircraft towbarless tractors
- Simulation research on submarine rescuing methods of buoyancy loss during underwater strong maneuvering
- Online recognition methods of abnormal driving based on Encoder Decoder attention network
- Review on the manned/unmanned aerial vehicle cooperative system and key technologies
- Review on muffler design methods based on shooting noise principles
- Review on methodologies of reliability evaluation for CNC machine tools
- Numerical analysis of the temperature field at the gun tail of light recoilless weapons during continuous firing
- Simulation study on the exit velocity control scheme of coaxial coil electromagnetic launchers
- Study on anti jet penetration performance of a spaced armor composed of cermet elements
- Research on the capability of bullet proof glass against large caliber armor piercing bullet penetration
- Numerical simulation on energy output optimization of D shaped warhead charge
- Design of the wireless setting system for small caliber projectile muzzles
- Research on the after effect of hyper shaped charge PTFE jet on reactive armors
- Numerical simulation and experimental research on jetting projectile charge penetrating 45 steel target
- Optimization of artillery interior ballistic performance based on sequential loading of propellants
- Study on the effect of fillers on the projectile forming of combined MEFP warheads
- Research on the transfer alignment method of airborne miniature missiles
- Simulation study on fragment characteristics of explosive bombs in a plateau environment
- Simulation calculation and test verification of detonation wave pressure in rectangular tunnels
- Research on virtual intelligent reconnaissance training system based on YOLOv3 tiny
- Study on the flow characteristics of tandem supercavitating vehicles near the free surface
- Research on parameter setting of underwater explosion simulation
- Research on aerodynamic parameter identification of micro spoilers for spin stabilized trajectory correction projectiles
- Large scale experimental study on new suppression explosion materials for filling warship oil tanks
- Research on the properties of BPN in a high temperature environment
- Effective stiffness and stress analysis of ceramic composites reinforced with winding carbon nano tubes
- Experimental and numerical simulation on supersonic multi jet noise
- Design of RF stealth signal based on improved chaotic mapping and WFRFT
- Design of TDengine based edge cloud collaborative health monitoring system for mechanical equipment
- Numerical simulation of thermal explosion welding of tungsten copper bimetallic plates
- Precise forming of teeth step on screw rotor by cross rolling
- Design and analysis of an electro hydraulic proportional control hydropneumatic suspension simulation test bench
- Rolling bearing fault diagnosis based on CEEMD energy entropy and extreme learning machines
- Research on stress corrosion cracking of 2195 Al Li alloy in 30% HNO3