| 序号 | 文章标题 | 引用格式（中英文） |
|---|---|---|
| 1 | 迫击炮可动舵二维修正引信气动特性研究 | 杨宝清,杨东晓,朱远海.迫击炮可动舵二维修正引信气动特性研究［J］.兵器装备工程学报，2020,41(2):30-34. YANG Baoqing, YANG Dongxiao, ZHU Yuanhai.Study on Aerodynamic Characteristics of TwoDimensional Modified Fuze forMovable Rudder of Mortar［J］.Journal of Ordnance Equipment Engineering,2020,41(2):30-34. |
| 2 | 弹药类产品贮存寿命试验方法综述 | 朱乐乐，王雨时，闻泉，等.弹药类产品贮存寿命试验方法综述［J］.兵器装备工程学报，2020,41(03):223-230. ZHU Lele, WANG Yushi, WEN Quan, et al.Review of Methods for Storage Life Test of Ammunition Products［J］.Journal of Ordnance Equipment Engineering,2020,41(03):223-230. |
| 3 | 炸高对柔爆索爆炸切割脆性材料的影响研究 | 杨洋，赵铮.炸高对柔爆索爆炸切割脆性材料的影响研究［J］.兵器装备工程学报，2020,41(05):1-4. YANG Yang, ZHAO Zheng.Influence of Burst Height on Cutting of Brittle Materials by Mild Linear Shaped Charge［J］.Journal of Ordnance Equipment Engineering,2020,41(05):1-4. |
| 4 | 基于Fluent的尾翼弹滚转阻尼特性数值研究 | 叶军雄,李强,岳通,等.基于Fluent的尾翼弹滚转阻尼特性数值研究［J］.兵器装备工程学报，2020,41(05):43-47. YE Junxiong, LI Qiang, YUE Tong, et al.Numerical Simulation on RollDamping Characteristics of FinStabilized Projectile Based on Fluent［J］.Journal of Ordnance Equipment Engineering,2020,41(05):43-47. |
| 5 | 国外不敏感炸药综述 | 马晗晔，王雨时，王光宇.国外不敏感炸药综述［J］.兵器装备工程学报，2020,41(05):166-174. MA Hanye, WANG Yushi, WANG Guangyu.Summary of Foreign Insensitive Explosives［J］.Journal of Ordnance Equipment Engineering,2020,41(05):166-174. |
| 6 | 单轴磁传感器测量转速及滚转角的低成本方法 | 安亮亮，王良明，钟阳,等.单轴磁传感器测量转速及滚转角的低成本方法［J］.兵器装备工程学报，2020,41(07):1-4. AN Liangliang, WANG Liangming, ZHONG Yang, et al.LowCost Method for Measuring Rotational Speed and Rolling Angle Using SingleAxis Magnetometer ［J］.Journal of Ordnance Equipment Engineering,2020,41(07):1-4. |
| 7 | 攻角对高速射弹入水过程影响研究 | 梁景奇，王瑞，徐保成，等.攻角对高速射弹入水过程影响研究［J］.兵器装备工程学报，2020,41(07):23-28. LIANG Jingqi， WANG Rui， XU Baocheng， et al.Research on Influence of Angle of Attack on Process of HighSpeed WaterEntry Projectile［J］.Journal of Ordnance Equipment Engineering,2020,41(07):23-28. |
| 8 | 引信对极薄弱目标的动态发火测试方法 | 魏峥嵘,姚宝珍,冉雪磊，等.引信对极薄弱目标的动态发火测试方法［J］.兵器装备工程学报，2020,41(07):64-68. WEI Zhenrong, YAO Baozhen, RAN Xuelei, et al.Dynamic Firing Test Method of Fuze for Very Weak Target［J］.Journal of Ordnance Equipment Engineering,2020,41(07):64-68. |
| 9 | 超细桥丝全自动焊接的走丝张力控制方法 | 童辉,陈荷娟,朱从贵.超细桥丝全自动焊接的走丝张力控制方法［J］.兵器装备工程学报，2020,41(07):101-105,157. TONG Hui, CHEN Hejuan, ZHU Conggui.Wire Feeding Tension Control Method for Fully Automatic Welding of UltraFine Bridge Wire［J］.Journal of Ordnance Equipment Engineering,2020,41(07):101-105,157. |
| 10 | 变形镁合金缺陷及其无损检测研究进展 | 倪培君，王猛，乔日东，等.变形镁合金缺陷及其无损检测研究进展［J］.兵器装备工程学报，2020,41(07):158-163. NI Peijun,WANG Meng,QIAO Ridong, et al.Review of the Defects in Deformed Magnesium Alloys and Their Nondestructive Testing Method［J］.Journal of Ordnance Equipment Engineering,2020,41(07):158-163. |
| 11 | 国外PBX炸药装药安全贮存寿命评价研究 | 徐露萍，李念念，郭惠丽,等.国外PBX炸药装药安全贮存寿命评价研究［J］.兵器装备工程学报，2020,41(07):164-168. XU Luping, LI Niannian, GUO Huili, et al.Storage Safety Life Evaluation of PBX Explosive Charges at Abroad［J］.Journal of Ordnance Equipment Engineering,2020,41(07):164-168. |
| 12 | 基于mass_flux法的炸药火烧试验与数值仿真 | 王帅，智小琦，贾秋琳，等.基于mass_flux法的炸药火烧试验与数值仿真［J］.兵器装备工程学报，2020,41(08):1-6. WANG Shuai, ZHI Xiaoqi, JIA Qiulin, et al.Experiment and Numerical Simulation of Explosive Firing Based on Mass_Flux Method［J］.Journal of Ordnance Equipment Engineering,2020,41(08):1-6. |
| 13 | 基于实测过载的弹体侵彻姿态角计算模型 | 张铱翔，牛少华，唐彬，等.基于实测过载的弹体侵彻姿态角计算模型［J］.兵器装备工程学报，2020,41(08):22-25. ZHANG Yixiang, NIU Shaohua, TANG Bin, et al.Attitude Calculation Model of Projectile Penetration Attitude Based on Measured Acceleration［J］.Journal of Ordnance Equipment Engineering,2020,41(08):22-25. |
| 14 | 侵彻载荷下两种结构装药动态响应数值分析 | 谷鸿平，张立建，畅博，等.侵彻载荷下两种结构装药动态响应数值分析［J］.兵器装备工程学报，2020,41(08):41-44,96. GU Hongping, ZHANG Lijian, CHANG Bo, et al.Numerical Simulation on Dynamic Response of Two Charge Structures Subjected to Penetration Load［J］.Journal of Ordnance Equipment Engineering,2020,41(08):41-44,96. |
| 15 | 聚脲钢板复合层加固钢筋混凝土板抗爆性能研究 | 赵启明,石少卿,李季，等.聚脲钢板复合层加固钢筋混凝土板抗爆性能研究［J］.兵器装备工程学报，2020,41(08):214-221. ZHAO Qiming, SHI Shaoqing, LI Ji, et al.Study on AntiBlast Performance of RC Slabs Reinforced with PUSteel Plate Composite Layer［J］.Journal of Ordnance Equipment Engineering,2020,41(08):214-221. |
| 16 | 钢筋混凝土靶侵彻阻力模型研究进展 | 吴翰林,屈可朋,周涛.钢筋混凝土靶侵彻阻力模型研究进展［J］.兵器装备工程学报，2020,41(09):19-24. WU Hanlin, QU Kepeng, ZHOU Tao.Research Progress on Penetration Resistance Model of Reinforced Concrete Targets［J］.Journal of Ordnance Equipment Engineering,2020,41(09):19-24. |
| 17 | 电磁继电器冲击失效边界研究 | 徐子健，南宫自军，李炳蔚，等.电磁继电器冲击失效边界研究［J］.兵器装备工程学报，2020,41(09):51-57,74. XU Zijian, NANGONG Zijun, LI Bingwei, et al.Research on Failure Boundary of Electromagnetic Relay［J］.Journal of Ordnance Equipment Engineering,2020,41(09):51-57,74. |
| 18 | 防爆板厚度选型设计的有限元模拟分析 | 杨治林，郭进勇，李全俊，等.防爆板厚度选型设计的有限元模拟分析［J］.兵器装备工程学报，2020,41(09):58-62. YANG Zhilin, GUO Jinyong, LI Quanjun, et al.Research on Thickness Design of AntiExplosion Plate by Finite Element Method［J］.Journal of Ordnance Equipment Engineering,2020,41(09):58-62. |
| 19 | 引信后坐质量-弹簧系统动态特性与设计 | 居荣誉，王雨时，闻泉.引信后坐质量-弹簧系统动态特性与设计［J］.兵器装备工程学报，2020,41(09):68-74. JU Rongyu, WANG Yushi, WEN Quan.Dynamic Characteristics and Design of Fuze Setback MassSpring System［J］.Journal of Ordnance Equipment Engineering,2020,41(09):68-74. |
| 20 | 火炮装药内弹道性能次要功计算系数测试方法 | 赵煜华，闫光虎，严文荣，等.火炮装药内弹道性能次要功计算系数测试方法［J］.兵器装备工程学报，2020,41(09):90-93. ZHAO Yuhua, YAN Guanghu, YAN Wenrong, et al.Measurement Method of Subordinate Work Calculation Coefficient for Interior Ballistic Performance of Gun Propellant Charge［J］.Journal of Ordnance Equipment Engineering,2020,41(09):90-93. |
| 21 | 超音速鸭式布局导弹舵面偏转气动特性研究 | 王锌晨，王学德.超音速鸭式布局导弹舵面偏转气动特性研究［J］.兵器装备工程学报，2020,41(09):99-104. WANG Xinchen, WANG Xuede.Aerodynamic Analysis of a Missile with Dithering Canards in Supersonic［J］.Journal of Ordnance Equipment Engineering,2020,41(09):99-104. |
| 22 | 电点火头参数光敏传感测试方法及系统 | 李京昊，朱从贵，刘江涛，等.电点火头参数光敏传感测试方法及系统［J］.兵器装备工程学报，2020,41(09):215-220. LI Jinghao, ZHU Conggui, LIU Jiangtao, et al.Test Method and System for Parameters of Electric Match with Photosensitive Sensing Technology［J］.Journal of Ordnance Equipment Engineering,2020,41(09):215-220. |
| 23 | 弹道修正引信隔转平台抗高过载优化设计 | 李鑫鹏，郭朝勇，孔刚鹏，等.弹道修正引信隔转平台抗高过载优化设计［J］.兵器装备工程学报，2020,41(10):69-75. LI Xinpeng, GUO Chaoyong, KONG Gangpeng, et al.AntiHigh Overload Optimization Design of Ballistic Correction Fuze Isolation Platform［J］.Journal of Ordnance Equipment Engineering,2020,41(10):69-75. |
| 24 | 一种点传火管特性参数的理论预估与实验验证 | 焦旭英,严蕊,周敬,等.一种点传火管特性参数的理论预估与实验验证［J］.兵器装备工程学报，2020,41(10):183-187. JIAO Xuying, YAN Rui, ZHOU Jing, et al.Theoretical Estimation and Experimental Verification of Characteristics Parameters of Igniter［J］.Journal of Ordnance Equipment Engineering,2020,41(10):183-187. |
| 25 | 小口径旋转稳定弹在控制作用下的弹道特性 | 杨杰,谢飞,常思江，等.小口径旋转稳定弹在控制作用下的弹道特性［J］.兵器装备工程学报，2020,41(11):40-45. YANG Jie, XIE Fei, CHANG Sijiang, et al.Trajectory Characteristics of Small Caliber SpinStabilized Projectile Under Control［J］.Journal of Ordnance Equipment Engineering,2020,41(11):40-45. |
| 26 | 半穿甲弹侵爆复合防护结构仿真分析 | 孟德荣,贾振铎，赵铮.半穿甲弹侵爆复合防护结构仿真分析［J］.兵器装备工程学报，2020,41(11):46-50. MENG Derong, JIA Zhenduo, ZHAO Zheng.Simulation Analysis of Composite Protective Structure of SemiPiercing Projectile Penetrating and Exploding［J］.Journal of Ordnance Equipment Engineering,2020,41(11):46-50. |
| 27 | 质量偏心对旋转榴弹气动特性及飞行稳定性的影响 | 黄钰哲，陶钢，庞春桥.质量偏心对旋转榴弹气动特性及飞行稳定性的影响［J］.兵器装备工程学报，2020,41(11):65-69. HUANG Yuzhe, TAO Gang, PANG Chunqiao.Effect of Mass Eccentricity on Aerodynamic Characteristics and Flight Stability of Rotating Projectile［J］.Journal of Ordnance Equipment Engineering,2020,41(11):65-69. |
| 28 | 二次燃烧对燃气弹射初容室载荷影响数值研究 | 胡晓磊，孙船斌，郭佳肄，等.二次燃烧对燃气弹射初容室载荷影响数值研究［J］.兵器装备工程学报，2020,41(11):70-73. HU Xiaolei， SUN Chuanbin， GUO Jiayi， et al.Numerical Simulation of SecondaryCombustion Influence on GasEjection Load in Initial Chamber［J］.Journal of Ordnance Equipment Engineering,2020,41(11):70-73. |
| 29 | 防暴动能弹钝性弹道冲击实验测试研究综述 | 汪送.防暴动能弹钝性弹道冲击实验测试研究综述［J］.兵器装备工程学报，2020,41(12):1-7. WANG Song.Review on Experimental Tests of AntiRiot Kinetic Projectiles Blunt Ballistic Impact［J］.Journal of Ordnance Equipment Engineering,2020,41(12):1-7. |
| 30 | 高速射弹入水过程弹道与流体动力特性研究 | 郝博，代浩，吕超.高速射弹入水过程弹道与流体动力特性研究［J］.兵器装备工程学报，2020,41(12):21-26. HAO Bo, DAI Hao, LYU Chao.Research on Water Entry Trajectory and Hydrodynamic Characteristics of HighSpeed Projectiles［J］.Journal of Ordnance Equipment Engineering,2020,41(12):21-26. |
| 31 | 侵彻过程中弹引系统的冲击传递特性研究 | 张冬梅，高世桥，李世中.侵彻过程中弹引系统的冲击传递特性研究［J］.兵器装备工程学报，2020,41(12):27-34. ZHANG Dongmei, GAO Shiqiao, LI Shizhong.Study on Impact Transfer Characteristics of Projectile System During Penetration［J］.Journal of Ordnance Equipment Engineering,2020,41(12):27-34. |
| 32 | 超空泡射弹侵彻间隔薄靶的数值模拟研究 | 李恒，唐奎，段慧，等.超空泡射弹侵彻间隔薄靶的数值模拟研究［J］.兵器装备工程学报，2020,41(12):35-40. LI Heng, TANG Kui, DUAN Hui, et al.Numerical Simulation on Penetration of Supercavitating Projectiles into Spaced Thin Targets［J］.Journal of Ordnance Equipment Engineering,2020,41(12):35-40. |
| 33 | 火工分离推杆分离特性研究 | 于兵，相升海，闫利伟，等.火工分离推杆分离特性研究［J］.兵器装备工程学报，2020,41(12):57-62. YU Bing, XIANG Shenghai, YAN Liwei, et al.Study on Separation Characteristics of Pyrotechnic Separation Pushing Rod［J］.Journal of Ordnance Equipment Engineering,2020,41(12):57-62. |
| 34 | 基于粒子群算法的磁流变缓冲器磁路设计研究 | 韩晓明，张超，许桎嶂，等.基于粒子群算法的磁流变缓冲器磁路设计研究［J］.兵器装备工程学报，2020,41(12):161-165. HAN Xiaming, ZHANG Chao, XU Zhizhang, et al.Research on Magnetic Circuit Design of Magnetorheological Buffer Based on Particle Swarm Optimization［J］.Journal of Ordnance Equipment Engineering,2020,41(12):161-165. |
| 35 | 近地爆炸冲击波传播特性数值模拟与应用 | 曹涛，孙浩，周游，等.近地爆炸冲击波传播特性数值模拟与应用［J］.兵器装备工程学报，2020,41(12):187-191. CAO Tao, SUN Hao, ZHOU You, et al.Numerical Simulation and Application of Propagation Characteristics of Shock Wave Near Ground Explosion［J］.Journal of Ordnance Equipment Engineering,2020,41(12):187-191. |
| 36 | 静动爆冲击波数值仿真分析 | 王良全，商飞，孔德仁.静动爆冲击波数值仿真分析［J］.兵器装备工程学报，2020,41(12):208-213. WANG Liangquan, SHANG Fei, KONG Deren.Numerical Simulation Analysis of Static and Dynamic Shock Waves［J］.Journal of Ordnance Equipment Engineering,2020,41(12):208-213. |
| 37 | 引信惯性触发开关动态特性分析 | 李菁,彭善国,李新亮.引信惯性触发开关动态特性分析［J］.兵器装备工程学报，2020,41(S1):36-39. LI Jing, PENG Shanguo, LI Xinliang.Analysis of Dynamic Characteristics of Fuze Inertial Impact Switch［J］.Journal of Ordnance Equipment Engineering,2020,41(S1):36-39. |
| 38 | 泡沫铝填充CFRP结构吸能特性的研究 | 王久赫，任杰.泡沫铝填充CFRP结构吸能特性的研究［J］.兵器装备工程学报，2020,41(S1):182-186. WANG Jiuhe, REN Jie.Study on Energy Absorption Characteristics of CFRP Structure Filled with Aluminum Foam［J］.Journal of Ordnance Equipment Engineering,2020,41(S1):182-186. |
| 39 | 侵彻引信的技术特点、现状及发展趋势 | 郭天吉，史文卿.侵彻引信的技术特点、现状及发展趋势［J］.兵器装备工程学报，2020,41(S2):26-29. GUO Tianji, SHI Wenqing.Technical Characteristics, Current Status and Development Trend of Penetration Fuze［J］.Journal of Ordnance Equipment Engineering,2020,41(S2):26-29. |
| 40 | 钟表机构远解测时方法及其应用 | 肖力,陈训华,黄江.钟表机构远解测时方法及其应用［J］.兵器装备工程学报，2020,41(S2):88-91.XIAO Li, CHEN Xunhua, HUANG Jiang.Method and Application of a Remote Time Measurement for Clock Mechanism［J］.Journal of Ordnance Equipment Engineering,2020,41(S2):88-91. |
| 41 | 金属橡胶和螺旋弹簧分布式组合隔振系统研究 | 周成康，袁慧君，于殿君.金属橡胶和螺旋弹簧分布式组合隔振系统研究［J］.兵器装备工程学报，2020,41(S2):100-102.ZHOU Chengkang, YUAN Huijun, YU Dianjun.Research on Distributed Composite Vibration Isolation System Based on Metal Rubber and Spiral Projectile［J］.Journal of Ordnance Equipment Engineering,2020,41(S2):100-102. |
| 42 | 中心孔药型罩射流成型理论及仿真 | 韩峰，张东辉，陈放.中心孔药型罩射流成型理论及仿真［J］.兵器装备工程学报，2020,41(1):23-27. HAN Feng, ZHANG Donghui, CHEN Fang.Theoretical Calculation and Numerical Simulation of Jet Forming of ConicalLiner with CenterOrifice［J］.Journal of Ordnance Equipment Engineering,2020,41(1):23-27. |
| 43 | 基于组合方法的烟幕弹烟雾颗粒生成与扩散状态模拟 | 张帅，傅德彬，朱希娟.基于组合方法的烟幕弹烟雾颗粒生成与扩散状态模拟［J］.兵器装备工程学报，2020,41(1):33-37. ZHANG Shuai, FU Debin, ZHU Xijuan.Simulation of Smoke Bomb Particle Generation and Diffusion State Based on Combined Method［J］.Journal of Ordnance Equipment Engineering,2020,41(1):33-37. |
| 44 | 外罩开槽式双层药型罩毁伤元数值模拟 | 吴浩宇,周春桂,王志军，等.外罩开槽式双层药型罩毁伤元数值模拟［J］.兵器装备工程学报，2020,41(1):38-42，47. WU Haoyu, ZHOU Chungui, WANG Zhijun, et al.Numerical Simulation of Slotting Type Double Shaped Charge Liner Formed Penetrator［J］.Journal of Ordnance Equipment Engineering,2020,41(1):38-42，47. |
| 45 | 截顶M形顶部结构药型罩形成射流的数值模拟 | 安文同,高永宏,陈熙，等.截顶M形顶部结构药型罩形成射流的数值模拟［J］.兵器装备工程学报，2020,41(2):40-43. AN Wentong, GAO Yonghong, CHEN Xi, et al.Numerical Simulation of Jet Formed by a Truncated MShaped Top Structure Liner［J］.Journal of Ordnance Equipment Engineering,2020,41(2):40-43. |
| 46 | 316L不锈钢药型罩SLM成型及威力试验研究 | 刘峻豪，李文彬，张庆，等.316L不锈钢药型罩SLM成型及威力试验研究［J］.兵器装备工程学报，2020,41(07):5-8. LIU Junhao, LI Wenbin, ZHANG Qing, et al.SLM Printing and Power Test of 316L Stainless Steel Paint Cover［J］.Journal of Ordnance Equipment Engineering,2020,41(07):5-8. |
| 47 | 多组件式机械分离装置可靠性试验与评估方法 | 张子骏,洪东跑,徐子健,等.多组件式机械分离装置可靠性试验与评估方法［J］.兵器装备工程学报，2020,41(07):49-52. ZHANG Zijun, HONG Dongpao, XU Zijian, et al.Reliability Test and Evaluation Method of MultiComponent Mechanical Separation Device［J］.Journal of Ordnance Equipment Engineering,2020,41(07):49-52. |
| 48 | 结构参数对新型聚能装药性能影响的数值分析 | 王一凡，王志军，袁毓雯，等.结构参数对新型聚能装药性能影响的数值分析［J］.兵器装备工程学报，2020,41(08):7-10. WANG Yifan, WANG Zhijun, YUAN Yuwen, et al.Numerical Analysis on Influence of Structural Parameters on Shaped Charge and Penetration Performance［J］.Journal of Ordnance Equipment Engineering,2020,41(08):7-10. |
| 49 | 小尺寸SCB裸桥与涂LTNR时的电爆发火特性 | 樊志伟，严楠，贺翔，等.小尺寸SCB裸桥与涂LTNR时的电爆发火特性［J］.兵器装备工程学报，2020,41(09):29-35. FAN Zhiwei, YAN Nan, HE Xiang, et al.ElectroExplosive Ignition Characteristics of Bare and LTNR Coated SmallSized SCB［J］.Journal of Ordnance Equipment Engineering,2020,41(09):29-35. |
| 50 | 一种带隔板双层药型罩结构的优化设计 | 段聪慧，尹建平，马国徽，等.一种带隔板双层药型罩结构的优化设计［J］.兵器装备工程学报，2020,41(11):51-54. DUAN Conghui, YIN Jianping, MA Guohui, et al.Invention Relates to an Optimized Design of a DoubleLayer Cartridge Hood with Diaphragm［J］.Journal of Ordnance Equipment Engineering,2020,41(11):51-54. |
| 51 | 爆炸活塞式分离器的设计与试验研究 | 郭晨冰，杨洋，赵铮.爆炸活塞式分离器的设计与试验研究［J］.兵器装备工程学报，2020,41(11):129-133. GUO Chenbing, YANG Yang, ZHAO Zheng.Design and Experimental Study of Explosive Piston Separator［J］.Journal of Ordnance Equipment Engineering,2020,41(11):129-133〓. |
| 52 | 火箭卫星舱壳体分离灵敏度分析与优化设计 | 葛悦，王洪波，龚旻，等.火箭卫星舱壳体分离灵敏度分析与优化设计［J］.兵器装备工程学报，2020,41(12):46-52,72. GE Yue, WANG Hongbo, GONG Min, et al.Rocket Satellite Cabin Separation Sensitivity Analysis and Optimization［J］.Journal of Ordnance Equipment Engineering,2020,41(12):46-52,72. |
| 53 | 火工分离推杆分离特性研究 | 于兵，相升海，闫利伟，等.火工分离推杆分离特性研究［J］.兵器装备工程学报，2020,41(12):57-62. YU Bing, XIANG Shenghai, YAN Liwei, et al.Study on Separation Characteristics of Pyrotechnic Separation Pushing Rod［J］.Journal of Ordnance Equipment Engineering,2020,41(12):57-62. |
| 54 | 模块化聚能切割装置设计及效能评估 | 陈治民，郭三学.模块化聚能切割装置设计及效能评估［J］.兵器装备工程学报，2020,41(12):123-126. CHEN Zhimin, GUO Sanxue.Design and Performance Evaluation of Modular EnergyConcentrating Cutting Device［J］.Journal of Ordnance Equipment Engineering,2020,41(12):123-126. |
| 55 | 一体式半导体桥点火装置在火箭橇发动机中的应用 | 李天祥，张斐，郭峰，等.一体式半导体桥点火装置在火箭橇发动机中的应用［J］.兵器装备工程学报，2020,41(S1):59-62. LI Tianxiang, ZHANG Fei, GUO Feng, et al.Application of Integrated Semiconductor Bridge Ignition Device in Rocket Sled Motors［J］.Journal of Ordnance Equipment Engineering,2020,41(S1):59-62. |
| 56 | 高强度螺栓预紧力控制试验研究 | 刘俊州，宋向涛，何朝勋，等.高强度螺栓预紧力控制试验研究［J］.兵器装备工程学报，2020,41(S1):197-200. LIU Junzhou, SONG Xiangtao, HE Chaoxun, et al.Experiment Research on Preload Control of HighStrength Bolts［J］.Journal of Ordnance Equipment Engineering,2020,41(S1):197-200. |
